Decanter centrifuges are high-speed separator systems used for solid-liquid separation in wastewater treatment, mining, food processing and the chemical industry. Their continuous operating principle delivers high capacity and low-moisture solids. The bowl and scroll geometry are calculated specifically for each application.

• Capacity: 1 – 100 m³/h, custom design
• Bowl speed: 2,500 – 4,000 rpm
• Material: Duplex stainless steel, SS316L, titanium coating
• Wear-resistant tungsten carbide coating option
• Automatic control panel and vibration monitoring system

Free-standing steel chimneys, boiler house chimneys and process exhaust stacks are manufactured to withstand high temperatures and corrosive gases. Structural calculations account for wind load, seismic load and thermal expansion. Internal insulation and acid-resistant liner options are available.

• Height: 5 – 60 meters, single or multi-flue
• Material: Carbon steel, stainless steel, Corten steel
• Internal liner: Acid-resistant brick, refractory concrete, ceramic
• Chimney cap and lightning protection systems included
• MYK Level 3 certified chimney installation team

Scrubber (gas washer) systems are used to neutralize harmful gases such as acid vapors, ammonia, chlorine, SO₂ and VOCs. They are produced in three main types: packed bed, venturi and spray tower. They are widely preferred in chemical, fertilizer, metal plating and waste incineration plants.

• Flow rate: 500 – 100,000 m³/h gas capacity
• Efficiency: 95% – 99.9% treatment efficiency
• Material: PP, PVDF, FRP, SS316L, titanium
• Packed bed (Pall Ring, Raschig Ring) options
• Integrated circulation pump, pH control and dosing system

Autoclaves are high-pressure, high-temperature closed vessels used in sterilization, composite curing, canned food cooking and rubber vulcanization processes. They are delivered with quick-opening doors, temperature-pressure automation and safety interlocks.

• Operating pressure: 1 – 15 bar (higher for custom designs)
• Operating temperature: 100°C – 250°C
• Volume: 100 liters – 50 m³
• Quick-lock door, automatic pressure relief system
• PLC-controlled automation, recording and reporting software

Shell & tube heat exchangers are used in chemical, petrochemical, energy and food processes to transfer heat between two fluids. Straight-tube, U-tube and spiral-wound types are available. Design and heat transfer calculations are performed in accordance with TEMA standards.

• Heat transfer area: 1 – 2,000 m²
• Design pressure: Vacuum – 100 bar
• Design temperature: -40°C to +450°C
• Material: Carbon steel, SS304/316, Duplex, titanium, Cu-Ni
• TEMA R/C/B/U type configurations

Filter tanks are pressure vessels used in water treatment, drinking water filtration, sand filtration and industrial process filtration. Suitable designs are available for sand, activated carbon, anthracite and resin media. Backwash automation ensures long service life.

• Diameter: 400 mm – 3,500 mm
• Operating pressure: 2 – 10 bar
• Material: Carbon steel (epoxy-coated), SS304/316, FRP
• Top distributor, bottom collector and nozzle system included
• Manual or automatic valve control

Tank farms are facilities for bulk storage of fuel, chemicals, liquid fertilizer and industrial liquids. Turnkey installation covers the foundation design, tank manufacturing, piping connections, pump groups, level measurement systems and fire safety infrastructure.

• Capacity: tanks from 10 to 5,000 m³
• NFPA-compliant foam and fire suppression system
• Automatic level measurement and stock tracking system
• Tank-top platform, guardrail and staircase systems
• Grounding, cathodic protection and leak detection

IBC (Intermediate Bulk Container) tanks are pallet-mounted container systems designed for the safe transport and storage of chemical, food and pharmaceutical liquids. UN-certified designs are suitable for the transport of dangerous goods.

• Volume: 500 – 1,500 liters, standard models
• Material: SS304/316L, HDPE, composite options
• UN code certification for dangerous goods transport
• Bottom discharge valve and top fill cap
• Forklift pockets and stackable design

Mobile tanks are portable pressure vessels used to transport fuel, water and chemicals on construction sites, in temporary storage and in field operations. Designs suitable for road, sea and rail transport are certified in accordance with ADR, RID and IMDG standards.

• Volume: 5 – 60 m³
• Material: Carbon steel, stainless steel, aluminum
• Trailer or ISO container type carrier
• Internal baffle and wave breaker system
• Bottom filling/discharge, top manhole and safety valves

Carbon steel pressure vessels are heavy-duty vessels used to store liquids and gases under high pressure in the oil, chemical and energy industries. Welded fabrication, heat treatment (stress relieving) and NDT inspections ensure full traceability.

• Design pressure: 10 – 250 bar
• Material: P265GH, P355GH, SA-516 Gr.70, 09Г2С
• Wall thickness: 6 – 100 mm
• Hydrostatic test, RT/UT/MT/PT inspections
• Internal/external epoxy, rubber or glass-reinforced lining

Stainless steel tanks are preferred for hygienic storage and processing in the food, beverage, pharmaceutical, cosmetics and chemical industries. They are manufactured with a mirror-finish interior surface, hygienic weld seams and a design that facilitates sanitation.

• Material: AISI 304, 316, 316L, 321, Duplex, 12Х18Н10Т
• Surface: 2B, BA, No.4, mirror finish (Ra ≤ 0.4 µm)
• Volume: 100 liters – 500 m³
• Thermal insulation (rock wool, PU) and sheet cladding
• CIP (clean-in-place) system integration

Horizontal storage tanks are ideal for storing liquid food, fuel, chemicals and drinking water in facilities with low ceiling heights, whether installed underground or above ground. The horizontal cylindrical body provides an ideal geometry for non-cryogenic liquids.

• Capacity: 1 – 150 m³
• Material: SS304, SS316L, 12Х18Н10Т
• Horizontal cylindrical body, dished or conical heads
• Mounting on concrete or steel chassis
• Level gauge, manhole and ventilation connections

Stock and storage tanks are high-capacity, unpressurized or low-pressure tanks designed for storing raw materials, semi-finished products and finished products. They are produced in vertical and horizontal configurations. Standard or custom connection points are offered for easy integration into the process line.

• Vertical or horizontal configuration
• Capacity: 100 liters – 1,000 m³
• Fixed or removable top cover
• Sampling valve, temperature and level sensor
• Easy-to-clean hygienic interior surface

Industrial silos are manufactured for storing grain, flour, sugar, cement, plastic granules and powdered materials. The cylindrical body, conical bottom and discharge system keep the bulk material flow under control. Both pressurized and non-pressurized types are available.

• Capacity: 5 – 5,000 m³
• Conical bottom angle: 45° – 70°
• Material: Carbon steel, stainless steel, aluminum
• Top filter, pressure relief valve, level sensor
• Ventilation, dust collection and discharge screw

Mixer tanks are used in liquid-liquid, liquid-powder and liquid-gas mixing processes. Anchor, turbine, propeller, helical and rotor-stator agitator options are available. They are widely used in the cosmetics, food, paint and chemical industries.

• Volume: 50 liters – 50 m³
• Agitator type: Anchor, turbine, propeller, rotor-stator
• Motor power: 0.5 – 75 kW
• Speed control: Adjustable via frequency inverter
• Vacuum, pressurized or atmospheric operation
• Optional scraper and temperature control jacket

Blender tanks are process vessels designed for powder mixing, granule homogenization and the mixing of high-viscosity products. Conical screw (ribbon), double-cone and V-type configurations are available. They comply with hygienic design standards for the pharmaceutical and food industries.

• Volume: 100 liters – 30 m³
• Design: Conical screw, double-cone, V-type
• Mixing time: 5 – 30 minutes
• Homogeneity: ± 1% precision
• 3D modeling, structural analysis and FEA verification
• Fill-discharge automation and sampling port

Process tanks are temperature- and pressure-controlled reaction vessels used to produce intermediate and final products in chemical, pharmaceutical, food and cosmetics manufacturing. With a jacketed structure, heating-cooling capability, agitation and automation integration, they form the heart of the production line.

• Volume: 50 liters – 200 m³
• Jacket type: Half-pipe, dimple, full jacket, coil
• Heat transfer fluid: Steam, hot water, cooling water, oil
• Design pressure: Vacuum – 40 bar (shell)
• PLC/SCADA integration, recipe management
• ATEX-compliant explosion protection options

Reactor tanks are process vessels in which chemical reactions take place under controlled conditions, with temperature, pressure and mixing parameters precisely managed. They are suitable for reactions such as polymerization, hydrogenation, esterification and neutralization.

• Volume: 10 liters – 100 m³
• Operating pressure: Vacuum – 100 bar
• Operating temperature: -40°C – +350°C
• Material: SS316L, Hastelloy, Duplex, titanium, nickel alloy
• Mechanical seal, magnetic drive, dry-running seal system
• Sampling, gas injection and pressure relief

Emulsion tanks are homogenization vessels specially designed for the production of emulsion products such as cosmetic creams, lotions, shampoos, toothpaste and pharmaceutical creams. Vacuum operation, a high-speed rotor-stator homogenizer and a jacketed structure ensure a homogeneous product.

• Volume: 50 liters – 10 m³
• Homogenizer speed: 1,500 – 3,600 rpm
• Vacuum operation to prevent air bubbles
• Jacketed structure: Heating-cooling control
• Scraper, high shear and cyclone system
• CIP/SIP (cleaning and sterilization) integrated